Does a pass mean the layout meets code?
No. A pass only means the entered clearance meets the common reference minimum CrewMeasure checks against. Local code adoption and amendments still govern.
Bathroom Layout Calculator
Check fixture clearances against common reference minimums.
Enter fixture positions and CrewMeasure returns a pass or fail clearance check for each fixture, with the reference distance used shown alongside your entry.
Material ListThis layout clears all code minimum clearances.
Toilet clearances
Measured from the center of the toilet flange to the nearest finished wall or fixture.
Shower
Interior shower stall dimensions and clear floor space in front of it.
Lavatory and ceiling
Clear floor space in front of the lavatory, and the finished ceiling height.
Bathroom clearance results
Clears code minimums
Detail values
- Toilet side clearance
- Pass
- Toilet front clearance
- Pass
- Shower size
- Pass
- Shower front clearance
- Pass
- Lavatory front clearance
- Pass
- Ceiling height
- Pass
Assumptions
FAQ
Which fixtures are checked?
Water closet, lavatory, and shower or tub clearances are checked using the values you enter for each fixture.
Can I adjust the reference clearance values?
The reference minimums are shown next to each result so you can compare them against your locally adopted code before relying on a pass result.
Disclaimer
This is a general clearance reference only. Local code amendments and accessibility requirements must be verified locally before finalizing a layout.